Turn Clamp - Feeda Group Ltd.

Product category

Chain
1.Stainless Steel Chain
2.Animal Chain
3.Weldless Chain
4.Welded Link Chain
5.Plastic Chain
6.Chain Sling
Wire Rope
1.Steel Wire Rope
2.Line Contacted Wire Rope
3.No-rotating Steel Wire Rope
4.Elevator Steel Wire Rope
5.Compacted Wire Rope
6.Triangular Wire Rope
7.PVC Coated Wire Rope
8.Stainless Steel Wire Rope
9.Aircraft Cord
10.Guy Rope
11.Steel Wire
12.Steel Series
13.Wire Rope Sling
Rigging Hardware
1.Spelter Socket
2.Solid Brass Product
3.Swivel
4.Quick Link
5.Snap Hook
6.Hook & Link
7.Load Binders
8.Bolt & Nut
9.Wire Rope Thimble
10.Wire Rope Clip
11.Turnbuckle
12.Shackle
13.G80 Products
14.G100 Products
15.Clips & Rings
Marine Hardware
1.Accessories
2.Anchor Chain
3.Anchor
Lifting & Hoist Products
1.Lifting Clamp & Trolley
2.Lifting Hoist
3.Block & Pulley
4.Synthetic Bridle Sling
5.Round Sling
6.Webbing Sling
Cargo Control & Transport Products
1.Cargo Control Product
2.Ratchet Buckle & End Fitting
3.Ratchet Tie Down

Turn Clamp
Type：Lifting Hoist Products - Lifting Clamp Trolley

Turn Clamp

Part No. Model WLL(tonnes) Jaw Opening(mm) Weight(kg)

FD-0099 DFM1 1 0-15 2.7

FD-0100 DFM2 2 0-20 5.6

FD-0101 DFM3 3 0-30 8

FD-0102 DFM5 5 0-60 13.4

DFM turn clamp

Working load limit(WLL)：1-5T

Use：

● For lifting and turn steel plate.

● From a mechanics point of view ,these clamps have ideal designs,which are compact ,
lightweight ,easy to use.

● The main body and parts are made from die-forge special alloy steels, which are optimally

tempered for maximum strength and durability.

● The working load limited is applied in one piece , during lifting single could be in use for
horizontal lifting and transport.

◇Prev：6x19 Steel Wire Rope (Ungalvanized and Galvanized)
◇Next：Roller Shackle

【Turn Clamp】

Turn Clamp

Part No.	Model	WLL(tonnes)	Jaw Opening(mm)	Weight(kg)
FD-0099	DFM1	1	0-15	2.7
FD-0100	DFM2	2	0-20	5.6
FD-0101	DFM3	3	0-30	8
FD-0102	DFM5	5	0-60	13.4
DFM turn clamp Working load limit(WLL)：1-5T Use： ● For lifting and turn steel plate. ● From a mechanics point of view ,these clamps have ideal designs,which are compact , lightweight ,easy to use. ● The main body and parts are made from die-forge special alloy steels, which are optimally tempered for maximum strength and durability. ● The working load limited is applied in one piece , during lifting single could be in use for horizontal lifting and transport.